| Title | SKU | Price |
|---|---|---|
| Default Title | SAR:LMA100-SET-P |
$12,000
|
Mark 3 is a flexible moisture analyzer system for labs and production facilities. Its optional modular add-ons provide the best solution for every measuring task.
Its high-resolution weighing system also makes the Mark 3 HP suitable for precisely analyzing the moisture and water content of very dry samples. This feature makes it a genuine alternative to Karl-Fisher titration.
Mark 3 HP Moisture Analyzer with printer, consisting of:
Features:
| Capacity | 100g |
| Readability | 0.0001g |
| Calibration | N/A |
| Draft protection | Moisture Analyzer |
| Data output port | RS232 |
| Warranty | 2 Years |
Recommended moisture range 0.001 – 99.999%
reproTEST Built in reproTEST for determining the repeatability of the weighing system
Display of results 0.001%
Balance resolution 0.0001 grams
Balance capacity 100 grams
Balance repeatability +/-0.0001g
Recommended working range 0.005 to 99.995%
| Method of Measurement: | Loss on drying via four infrared quartz cylinders |
| Modular configuration: | Control and Heater modules (Optional: up to 4 heater modules) |
| Temperature setting/control: | 30-210o C in one degree increments via RTD sensor, +/- 1oC |
| Temperature steps: | Programmable one or two with selectable ramp rate |
| Standby temperature: | 30-160o C in one degree increments with selectable equilibration time |
| Temperature display: | Display of both target and current temp at each stage of testing and standby |
| Conserve mode clock: | Programmable time by day of week to shut down and wake up analyzer |
| Balance module design: | Monolithic weighing cell with protective stainless steel cover |
| Balance calibration: | Internal calibration weight or external weights accepted for manual calibration |
| Ideal weight: | Audio and visual display for programmable target sample weight addition |
| Target limit alert: | Minimum and maximum programmable limits and screen alert when test done |
| Program storage: | 300 programs with unique settings, alphanumeric naming |
| Result storage: | 999 results with statistics: Average, SD, RSD, high and low |
| Units of measure of results: | Weight, %Moisture, %Solids, %Volatiles, Fuel Moisture, PPM, mg/L |
| Endpoint determination: | Actual slope, Calculation and Time modes |
| Sample ID: | Numeric, incremental, alphanumeric or turned Off |
| Modes of operation: | Standard test, Syringe, "Splash" method or Concentration modes |
| Security mode: | Selectable setup and operation protection with numeric code |
| Graph mode: | Graph of temperature and percentage over time |
| Display: | Quarter VGA with contrast adjustment (black on white or white on black) |
| Keypad: | Sealed membrane with audible tactile feedback |
| Internal printer: | Built-in thermal, 40 character graphic with selectable format |
| Power requirements: | 90-250 VAC 50/60 Hz self adjusting power supply |
| Dimensions (L x W x H): | 16.25'' x 19.5'' x 9.25'', shipping weight 35lbs (includes one heater module) |
| Warranty period: | 2 years, complete parts and labor |
